Loading ...
Loading ...
Loading ...
9EN
AUDIO IN
FM/D
AB AE
RIAL
(75 )
Connect the power cord to the wall
socket.
Prepare the remote
control
Caution
•
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
• Batteries contain chemical substances, so
they should be disposed of properly.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA batteries
with correct polarities (+/-) as
indicated.
3 Close the battery compartment.
Power on
Press .
» The product switches to the last
selected source.
Switch to standby mode
Press again to switch the product to
standby with no clock display, or to
standby with clock display.
» The red standby indicator lights up.
• In standby, you may press and hold
to toggle clock display on
or o.
Note
•
The product switches to standby mode
after 15 minutes of inactivity.
• To achieve the ecient energy saving
performance, unplug any external
electronic device from the USB port when
the device is not in use.
Set the clock
1
In power on mode, press and hold
for more than 2 seconds to
enter the clock setting mode.
»
or is displayed.
2 Press to select 24H or 12H
hour format, and then press
.
» The hour digits begin to blink.
3 Press to set the hour, and
then press
.
» The minute digits begin to blink.
4 Press to set the minute, and
then press
.
» The clock is set.
a
Tip
•
To view clock in power on mode, press
briey.
• In standby, you may press and hold
to toggle clock display on or o.
• If clock display is turned on in standby,
power consumption increases.
Loading ...
Loading ...
Loading ...