Loading ...
Loading ...
Loading ...
SAFETY
86343970 18HP LIGHTNING BURNISHER
1-2
• Long or continuous exposure to high noise levels may cause permanent hearing loss. Always wear hearing
protection while using this machine.
• Injury to the eyes and/or body can occur if protective clothing and/or equipment is not worn while using this
machine. Always wear safety goggles and safety clothing while using this machine.
• Severe burn or injury could occur if you touch the hot muffler or exhaust pipe. DO NOT TOUCH THE HOT
MUFFLER OR EXHAUST PIPE.
• Any alterations or modifications of this machine could result in damage to the machine or injury to the
operator or other bystanders. Alterations or modifications not authorized by the manufacturer voids any and
all warranties and liabilities.
• To avoid injury or property damage, do not leave the machine where it can be tampered with or started by
persons untrained in its operation. You must have training in the operation of this machine before using it.
DO NOT leave the machine running unattended.
• Substantial damage to the floor, the machine, or personnel may result if the machine is operated with the pad
off center, damaged or missing. Do not operate the machine if the pad is off center, damaged or missing.
• Operating a machine that has loose parts could result in injury or property damage. Do not operate this
machine if there are loose parts. Inspect the machine for loose parts frequently. This will promote safe
operation and a long life for the machine.
• Vibration from machinery may cause numbness or tingling of the fingers in certain people. Smoking,
dampness, diet, and heredity may contribute to the symptoms. Wearing warm clothing, gloves, exercising and
refraining from smoking can reduce the effects of vibration. If the symptoms still persist, discontinue operation
of the machine.
• Overfilling the propane tank is the number one cause of problems with a propane machine. This can cause
the engine to run poorly or not at all. In addition, overfilling allows liquid propane to enter the fuel control
system, possibly ruining the lock off / regulator assembly. This voids the warranty on affected parts of the
machine. To avoid problems, read and understand fully, the section "Filling and Storing Propane Tanks."
• OVERHEATING is a major cause of engine failure. Keep the cooling air bonnet filter clean. Protect your
machine; don’t allow wax dust/lint to build up on the cooling fins of the engine cylinder(s). A good high
pressure spray wash directed at the fins when the engine is cold will prevent this from happening.
• LOW OIL AND DIRTY OIL account for most of the other failures. It is recommended changing the oil on a
regular schedule, perhaps exceeding that which is found in the engine manufacturers' manual. Checking the
oil daily, before putting the machine to work, is a good habit to get into and could save you the downtime and
expense of replacing the engine due to oil starvation. AFTER AN OIL CHANGE, MAKE SURE YOU HAVE
REPLACED THE OIL SUPPLY BEFORE RESTARTING THE ENGINE.
Loading ...
Loading ...
Loading ...