Loading ...
Loading ...
Loading ...
BISSELL.com 9
Removing & Replacing the Brush Roll
WARNING To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
1. Remove three screws from
endcap. Pull endcap off to
release Brush Roll. With cover
removed, the brush comes out
easily by tilting the loose end
out of the carriage.
2. To replace the Brush Roll
back into the machine, place
the large open end of the
brush onto the carriage and tilt
opposite end back into place.
3. With the brush sitting
relatively straight up and down
by itself, place endcap back on
top and replace three screws.
The brush will need to be held
and centered to the cover
while placing it back on.
4. Spin the brush by hand to
make sure it turns freely with
some minor resistance from
the motor. Push brush carriage
back into place with a light pull
against the lock.
Loading ...
Loading ...
Loading ...