Loading ...
Loading ...
Loading ...
INSTALLING THE ARRAY FRAME
The array frame is attached to the internal rigging of the VRX900 system using the provided Quick Release Pins
WARNING: Do not use any substitute for these pins.
1. Begin by attaching the two side arms (A) to either side of the center frame. Use a pair of the provided Quick
Release Pins (B)* to attach the arms to the frame. Note: Side arms should be attached
with the rubber bumper facing up and away from the center
frame. The center frame is installed with the rubber gasket
toward the enclosure and the label right side up. [NOTE: The
arms of the VRX932LA-AF and VRX-AF are deliberately
designed so as not to be interchangeable. The arms of the
VRX-SMAF are already attached.
2. Place the entire array frame on top of the VRX900 system
and flip up the drop levers (C) found on both sides of the
speaker to be received by the array frame arms.
3. Once the drop levers on the speaker are received by the
array frame, use a pair of the provided Quick Release Pins
(D) to attach the drop levers to the array frame.
*(B) does not apply to VRX-SMAF
MAXIMUM ARRAY SIZE
There are three variations of the VRX array frame. The VRX-AF supersedes the VRX932LA-AF. The VRX-SMAF
is solely intended for use with the VRX928LA and VRX915S. Before suspending a VRX array, determine which
version of the array frame you have and consult the table below to determine the maximum number of speakers
that may be safely suspended. The subwoofers must always be at the top of the array.
(C)
(A)
(D)
(B)*
(A)
(D)
VRX-AF Array Frame
Maximum number of VRX918S in array 6543210
Maximum number of VRX932LA-1 in array 0123456
VRX932LA-AF Array Frame
VRX-SMAF Array Frame
Maximum number of VRX918S in array 4 3 2 1 0
Maximum number of VRX932LA-1 in array
1 2 3 4 5
VRX932LA-AF ARRAY FRAME
The following table defines the maximum number of speakers that may be suspended using the VRX932LA-AF frame.
A minimum design factor of 7:1 is maintained for all speaker configurations at or below those indicated in the table.
VRX-AF ARRAY FRAME
The following table defines the maximum number of speakers that may be suspended using the VRX-AF frame. A
minimum design factor of 7:1 is maintained for all speaker configurations at or below those indicated in the table.
VRX-SMAF ARRAY FRAME
The following table defines the maximum number of speakers that may be suspended using the VRX-SMAF
array frame. A minimum design factor of 7:1 is maintained for all speaker configurations at or below those
indicated in the table.
The VRX subwoofers must always be on top of the array.
Maximum number of VRX915S in array 432220
Maximum number of VRX928LA in array 023456
19
All of the information in this section for VRX932LA-1 also applies to previous VRX932LA systems.
VRXpassive_UG_081808 copy.qxp 8/18/08 11:37 AM Page 19
Loading ...
Loading ...
Loading ...