Loading ...
Loading ...
Loading ...
MC-320/22-1
13
English
CD Operation
Selecting a different track
● Press or once or repeatedly until the
desired track number appears in the display.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press to start playback.
Finding a passage within a track
1 Press and hold down on or
➜ The disc is played at high speed and low
volume.
2 When you recognise the passage you want,
release or .
➜ Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
SHUFFLE ......... tracks of the entire disc are
played in random order
SHUFFLE and REPEAT ALL…to repeat the
entire disc continuously in
random order
REPEAT ALL ...repeats the entire disc/ program
REPEAT ............ plays the current track
continuously
1 To select your play mode, press the SHUFFLE
or REPEAT on the remote control before or
during playback until the display shows the
desired function. (SHUF, REPEAT, REPEAT ALL)
2 Press to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3 To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE / REPEAT modes are no
longer displayed.
● You can also press STOP 9 to cancel your play
mode.
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1 Press PROG / REV (or PROGRAM / REV on
remote control) to enter the programming
mode.
➜ A track number is shown and PROGRAM
flashes.
2 Use the or to select your desired track
number.
3 Press PROG / REV (or PROGRAM / REV on
remote control) to confirm the track number to
be stored.
➜ The number of tracks programmed is shown.
4 Repeat steps 2-3 to select and store all desired
tracks.
➜ MEMORY FULL is displayed if you attempt to
program more than 40 tracks.
5 To start playback of your disc program, press
STOP 9 followed by or press directly.
Reviewing the program
In STOP mode, press and hold PROG / REV.
Until the display shows all your stored track
number in sequence.
Erasing the program
You can erase the program by:
● pressing STOP 9 twice during playback;
● opening the CD compartment;
➜ PROGRAM disappears from the display.
Loading ...
Loading ...
Loading ...