Loading ...
Loading ...
Loading ...
Place the unit in an upright position on a flat, stable and heat
-
resistant surface.
Ensure that there are no flammable or heat
-
sensitive materials or substances within one metre of the
front and 50 cm of the rear and sides of the unit. Using the heater in another position can be dangerous.
Before inserting the plug
into a suitable wall outlet, make sure that the unit is intact, properly assembled
and that the cord is not damaged. To avoid overloading a circuit, connect the unit only to a circuit where
no other equipment is connected.
When the power switch is in the OFF position [0], insert the plug into an earthed
outlet and turn on the
power.
Turn
the
power
switch
on
the
side
of
the
unit
to
the
"On"
position
to
power
the
unit.
On
the
display
screen, the power symbol lights up.
Press the "Power"
button on the control panel or remote control to turn on the unit. The unit starts to
operate with high power.
On the display screen, the "high power" and "°F" symbols light up, as well as the default temperature or
the last set temperature.
Press
the
On/Off
button
to
stop
the
operation
and
put
the
unit
into
standby
mode.
Only
the
power
symbol remains lit on the display screen.
Turn the power switch on the side of the unit to the OFF position to turn off the power to the unit.
Press
the Mode button repeatedly to select a power level
:
Low power (
600
W)
Medium power (
900
W)
High power (
1
500W)
On the display screen, the symbol for the corresponding power level lights up.
POSITIONING
THE HEATER
CONNECTING
THE HEATER
SWITCHING ON/OFF
SELECTING A POWER LEVEL
Loading ...
Loading ...
Loading ...