Loading ...
Loading ...
Loading ...
10 EN
3 Get started
Charge power
SA060 has a built-in battery that can be
charged through the USB port of a computer.
As shown, connect the SA060 to a PC by using
the USB cable.
Note
When you connect SA060 to a computer, you are
[Charge & transfer] or
[Charge & play]. If no option is selected, [Charge &
transfer] applies.
To play the SA060 when you charge power, select
[Charge & play].
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
»
battery is low. The player saves all settings
and switches off within 60 seconds.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
The charging animation stops and the icon is
displayed when the charging process is completed.
To conserve battery power and increase the
play time, do the following on SA060:
Set the backlight timer to a low value (go
to
> [Display settings] > [Screen off
timer]).
First-time setup
SA060 to a PC,
install Philips Device Manager on the PC. Over
the player through Philips Device Manager.
When you connect the SA060 to the PC for
1 Select InstallPhilips Device Manager.
2 Follow the on-screen instructions to
complete the installation of the software.
Note
The installation requires you to agree to the license
terms.
If the pop-up window is not displayed
automatically:
1 Select My Computer (Windows XP /
Windows 2000) / Computer (Windows
Vista / Windows 7).
2 Right click on the Philips GoGear SA060
icon.
3 Select Install Philips Device Manager.
4 Follow the on-screen instructions to
complete the installation of the software.
Loading ...
Loading ...
Loading ...