Loading ...
Loading ...
Loading ...
6
ROW FOR 45RPM. SUITABLE STROBE LIGHT WILL BE ON DURING PHONO MODE AND WILL LIGHT ON
THE STROB DOTS. SUITABLE DOTS WILL KEEP STABLIZED IN SIGHT IF THE SPEED IS CORRECT.
ADJUST SPEED BY PITCH CONTROL SLIDER (+/-10%).
- USE THE 45 RPM ADAPTOR IF REQUIRED.
- ADJUST THE VOLUME TO THE DESIRED LEVEL.
- AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING, TONE ARM WILL
AUTOMATICALLY RETURN TO THE TONE ARM REST PART.
- PRESS EJECT BUTTON DURING RECORD PLAYING, TURNTABLE WILL STOP GENTLY AND TONE ARM
WILL UTOMATICALLY RETURN TO THE TONE ARM REST PART.
PHONO ENCODING
1. PRESS FUNCTION BUTTON TO SELECT “PHONO” ON DISPLAY
2. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
3. PRESS THE REC BUTTON, THEN USB OR SD ICON WILL BE FLASHING.
4. PRESS SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT DESIRED MODE (USB OR SD)
FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING
THE ENCODING MODE AFTER FEW SECONDSS.
5. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
6. THE “REC” WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
7. TO FINISH ENCODING, PRESS STOP BUTTON (OR HOLD REC BUTTON CONTINUOUSLY THEN
RELEASE), “REC” WILL DISAPPEAR, RECORDING WILL STOP OPERATION, BUT TURNTABLE WILL KEEP
OPERATION. PRESS REC BUTTON AGAIN, ENCODING WILL RESUME TO WORK.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
- DO NOT TAKE OUT USB OR SD DEVICE DURING RECORDING TO USB/SD,
AUX IN JACK & ENCODING
PRESS FUNCTION BUTTON TO SELECT “AUX” ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE
(SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE
CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
1. PRESS FUNCTION BUTTON TO SELECT “AUX” ON DISPLAY, THEN INSERT MEMORY DEVICE (USB
DRIVE, SD OR MMC CARD)
2 .PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDSS TO READ MEMORY DEVICE. THEN USB OR SD
ICON WILL BE FLASHING.
3. PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT DESIRED MODE (USB OR SD) FOR
ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING THE
ENCODING MODE AFTER FEW SECONDSS.
4. IF ONLY USB DRIVE OR SD/MMC CARD IS INSERTED, STEP 3 CAN BE SKIPPED.
5. THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
6. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW “END” AND RETURN TO
“AUX” MODE.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE EXTERNAL
AUDIO DEVICE.
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY OR INSERT
THE MEMORY CARD IN THE DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE
OF THE MEMORY CARD SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE
STORAGE MEDIA (USB THUMB DRIVE / SD/MMC CARD). CHECK TO BE SURE THE DIRECTION IS
CORRECT BEFORE CONNECTION.
3. PRESS FUNCTION BUTTON TO SELECT “USB” OR “CARD” ON DISPLAY, THEN INSERT MEMORY DEVICE
(USB DRIVE, SD OR MMC CARD).
4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION
Loading ...
Loading ...
Loading ...