Loading ...
Loading ...
Loading ...
8 English
GETTING STARTED
BASE ASSEMBLY Screwdriver required.
FIGURE B
FIGURE A
1. Assemble the two base halves together. Position the base half
with the alignment pin, over the other base half with the alignment
sockets. Press the two halves together until ush. (See Figure A)
2. Assemble the base to the tower bottom. With the Tower on its
side, align the 4 base sockets onto the Tower bottom pins. Note;
one of the 4 pins is “D” shaped to allow it to t only one way. With
the base in position, secure the base bottom to the tower with the
4 Phillip screws provided. Tighten the screws securely but do not
over tighten. (See Figure B)
PLACEMENT NEAR A WALL OR
CORNER
Please position at least 6” away
from walls or other large surfaces.
Doing so will ensure your Tower
Circulator has adequate room
to intake air, providing optimum
performance. (See Figure C)
DIRECTING THE
AIRFLOW
Unlike any other tower
fan, this product creates a
wide span of airow called
V-Flow™ Circulation. The
Vornado logo indicates
the center point of the
V-Flow™ airstream, and
can be used as a reference
point for positioning the
product in the room. (See
Figure D)
FIGURE C
FIGURE D
6”
6”
Loading ...
Loading ...
Loading ...