Loading ...
Loading ...
Loading ...
Park-System (17)
For short breaks during vacuuming, for
example to move a small piece of furniture
or a rug, use the "Park system" to support
the flexible hose and cleaning head.
Depending on the model you have chosen your
appliance is equipped with different types of
filters: foam filter, electrostatic filter or washable
HEPA filter (24).
To change the filter or wash the HEPA filter (24)
turn the cover (25) of the filter left and take
filter out.
Even if the dustbag does not appear to be
full at this stage. it should be changed, as
very fine dust can clog up the pores of the
dust bag.
Turn off the appliance and unplug it.
Open the cover by pressing the hook (20)
and lifting it up until it snaps into place.
Your appliance is equipped with either a
paper dust bag (21) or a fabric dust bag
(26) (depending on model.)
If your appliance is fitted with a fabric dust
bag (26) follow the instructions as follows:
Pull the clip (36) out and empty the fabric
dust bag, then set the clip back and push it
until it can close the dust bag completely.
Do not wash the fabric dust bag.
Take hold of the dust bag by the handle
and pull. Remove the bag and throw it
away.
To refit a new bag push the cardboard
support of a new bag into the bag mount
(22) until it will go to further.
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not fitted
correctly.
Cleaning the air outlet filters
To replace the cover (25) after changing or
cleaning the filter, insert the cover by aligning
a grove (35) of the cover with a projection (28)
on the cleaner and twist to the right until to the
lock mark.
The foam filter should be cleaned regularly
by tapping it to remove the dirt.
The electrostatic filter should be changed
regularly. (approximately every 6 bag changes).
The washable HEPA filter should be cleaned
with cold and running water at least once a year.
Check that the appliance is correctly plugged in
and that the electrical socket is working.
- Do not use the brush.
- Allow HEPA filter to dry in a shaded place
for a day.
Stop the appliance and unplug it.
Check that the tubes, flexible hose and
cleaning tool are not blocked.
Check that the dust bag is not full. Replace
if necessary.
Check that the air outlet filter is not blocked.
Replace if necessary.
What to do if your appliance
does not work?
What to do when the suction
performance reduces?
Storage (18)
Changing the dust bag
When you have swiched off and unplugged
the appliance, press the button (12) to
automatically rewind the cord.
You can move or store your appliance in a
vertical positin by sliding the hook on the
underside of the appliance.
The dustbag needs changing when the
cleaner is set to maximum power and the
cleaner head window (19) is completely
coloured red.
Cleaning the motor filter
The motor filter is situated inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter (23) and clean it by tapping
to remove the dirt and then replacing it in
the vacuum cleaner.
E
- 5 -
Loading ...