Loading ...
Loading ...
Loading ...
Instruments & Controls
31
Indicators & Displays
The digital clock (1) displays hours and minutes with the clock mark
(2), when the ignition switch is ON (q).
To adjust the time, proceed as follows:
1.
Turn the ignition switch ON (q) to display the clock (page 25).
2.
Press and hold the mode button (3) until the display start
blinking.
3.
To advance the display 1 minute at a time, press and release the
mode button for 0.5 seconds.
Press and hold the mode button, for more than 0.5 seconds, the
display will begin advancing fast.
4.
Release the mode button when the display reaches the desired
time.
5.
To set the clock, press and release the mode button for less than
0.5 seconds.
The clock can also be set by turning the ignition switch off and
then on.
Digital Clock
(3) mode button
(1)
(2)
(3)
(1) digital clock
(2) clock mark
19 TRX420FE1 (ED)-32HR38500.book 31 ページ ２０１８年４月２４日 火曜日 午後１時５５分
Loading ...
Loading ...
Loading ...