Loading ...
Loading ...
Loading ...
8 English
Be sure the machine is level when checking
the oil level. (Refer to the engines operating
manual for seasonal grades).
We recommend that the oil be changed after
the fi rst 5 hours of use, then once every 50
hours.
STEP 4:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Do not add oil to the gasoline.
STEP 5:
Pull back the spring loaded collar at the high
pressure outlet and insert the high pressure
hose.
Release the collar and push the high pressure
hose until the collar clicks.
CAUTION
High pressure in quick connect area.
Risk of injury caused by improperly locked
high pressure hose.
■ Make sure you hear the "click" when inserting
the high pressure hose into the quick connec-
tion.
■ Pull the high pressure hose to make sure it is
seated properly before operating your unit.
STEP 6:
Connect garden hose to units`s water inlet.
WARNING
High pressure in quick connect area.
Risk of injury caused by improperly locked
high pressure hose.
■ Make sure you hear a "click" when inserting
the high pressure hose in to the quick con-
nection.
CAUTION
Engine Shipped without oil. Before starting
engine, fi ll with oil. Do not over-fi ll. Do not run
the engine with a high or low oil level as this
can cause engine damage.
If you have further questions regarding the
engine, please refer to the engine manual
included with the unit.
CAUTION
Never start engine while handlebar is folded.
CAUTION
Allow the engine to cool down before folding
down the handlebar for storage.
STEP 3:
Check oil level. Oil level should always be
between the "FULL" and "ADD" or "MAX" and
"MIN" marks on the dipstick as shown in the
picture below.
OPERATING INSTRUCTIONS
HOT!
FULL / MAX
ADD / MIN
Loading ...
Loading ...
Loading ...