Loading ...
Loading ...
Loading ...
11
8
7
6
5
4
3
2
1
9
10
05/1/28 XL-MP60(U).fm
TINSEA043SJZZ
XL-MP60
Preparation for Use
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
! FM/AM loop antenna connection
Connect the FM/AM loop antenna to the ANTENNA jack.
Position the FM antenna wire and rotate the AM loop antenna for
optimum reception. Place the AM loop antenna on a shelf, or attach
it to a stand or a wall.
Notes:
" Placing the antenna on the stereo system or near the AC power
cord may cause noise pickup. Place the antenna away from the
stereo system for better reception.
" Do not connect the attached FM antenna to an external antenna
as this may cause trouble.
Installing the AM loop antenna:
" Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
" Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
" Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
" Do not stand or sit on the speakers. You may
be injured.
Incorrect
Notes:
" The speakers are magnetically shielded.
Therefore, they do not affect the display even if you use them near
the TV. However, some color variation may occur, depending on
the type of TV used.
If color variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the color variation is still present...
Move the speakers further away from the TV.
" If any kind of magnet or an electromagnet is placed too close to the
TV and the system, irregular colors may appear on the TV screen.
Red
Black
Front speaker
(right)
Front speaker
(left)
Subwoofer
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
Loading ...
Loading ...
Loading ...