Loading ...
Loading ...
Loading ...
STACKING THE
WASHER AND
DRYER (if desired) (cont.)
Installation Instructions
INSTALLATION PREPARATION
Remove the
packaging.
Flatten the product carton to use as a pad to lay the
dryer down on its side. Continue using the carton to
protect the finished floor in front of
the installation location.
STACKING
KIT
GEFLSTACK CONTENTS
(OPTIONAL ACCESSORY)
Left hand
bracket
Right hand
bracket
4 rubber
pads
4 #12
x 1” screws
4 #8
x 1/2” screws
TOOLS YOU
WILL NEED
Phillips
screwdriver
Open-ended wrench
Pliers
Gloves
Level
INSTALLING THE
STACK BRACKET
KIT
REMOVE THE
DRYER LEVELING LEGS
A.
Carefully lay the dryer on its side. Use the
packing material so you don’t scratch the finish
on the dryer.
1
B.
Use an open-end wrench or pliers to remove the
dryer leveling legs.
INSTALL RUBBER PADS TO DRYER
BASE
Locate
the
4 rubber pads in the parts package.
Remove the adhesive backing and firmly place
over each bracket where you removed the
leveling legs.
2
17
Place pads
over
all four leveling
leg brackets
NOTE: Models
GFDR480, GFDR485, GFWR4800
and GFWR4805 cannot be stacked.
Back out and remove
all 4 leveling legs
16
Loading ...
Loading ...
Loading ...