Loading ...
Loading ...
Loading ...
17
CARE AND CLEANING
Cleaning the burner heads
To avoid possible burns, do not attempt cleaning be-
fore turning off all surface burners and allowing them
to cool.
Any additions, changes, or conversions required in
order for this appliance to satisfactorily meet the appli-
cation needs must be made by an authorized quali-
fi ed Agency. Routinely clean the cooktop. Wipe with
a clean, damp cloth and wipe dry to avoid scratches.
Keeping the surface burner head ports and slots clean
will prevent improper ignition and an uneven fl ame.
To clean recessed and contoured areas of cooktop:
• If a spill occurs on or in the recessed or contoured
areas, blot up spill with an absorbent cloth.
• Rinse with a clean, damp cloth and wipe dry.
To clean burner heads:
1. Remove the burner cap and burner head (see
Figura 14). Clean the cap and head with hot soapy
water and dry thoroughly.
2. For burned-on and dried spills, apply hot soapy
water to the burner cap and head to allow time for
the soils to soften.
3. Use a toothbrush to clean all over the burner head.
4. Wipe the burner cap and head clean with a soft,
clean cloth, sponge, or scratch-free cleaning pad.
Wipe out burner orifi ce with a cloth before placing
burner head and cap back on. The burner assem-
bly must be completely dry before use.
5. Make sure the burner caps and heads are placed
and seated properly over the ignitor. The three
mounting legs on burner will align with slots on the
orifi ce holder. When placed correctly, the burner
cap should not move off the burner head (see “1.7
Assembly of the Burner Caps” on page 9).
6. If burner fails to light, recheck placement of burner
head to the orifi ce holder and cap.
Figura 14: Removeable burner components
Important notes:
• Always keep the surface burner caps in place
whenever a surface burner is in use.
• When replacing the burner caps, be sure the
burner caps are seated fi rmly on top of the burner
heads.
• For proper fl ow of gas and ignition of burners do
not allow spills, food, cleaning agents, or any oth-
er material to enter the gas orifi ce port opening.
CAUTION
To avoid possible burns do not attempt to operate
the surface burners without the burner caps.
Do not use spray oven cleaner on the cooktop.
Burner
Cap
Burner
Head
Ignitor
Orifi ce
Holder
Orifi ce
Holder
Ignitor
Loading ...
Loading ...
Loading ...