Loading ...
Loading ...
Loading ...
Getting Started
19
US
Required cords
S Video cord for connecting a TV monitor
Audio/Video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Note
When only the receiver is set to “DVD” mode or the signal is input to the TV/SAT (COMPONENT VIDEO IN)
jacks, the signal is output from the COMPONENT VIDEO OUT jacks.
Tip
When using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the S Video jacks or
the Video jacks, your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y,
PB/CB, PR/CR). If your TV accepts progressive format signals, you must use this connection and set
“COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 76).
Step 3: TV and Video Component Hookups
Connect a To the
TV monitor MONITOR (S VIDEO OUT or VIDEO OUT) jack
VCR VIDEO 1 or VIDEO 2 (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks
Digital satellite receiver TV/SAT (COMPONENT VIDEO IN, S VIDEO IN, or VIDEO IN/AUDIO L/
R IN) jacks
Yellow (Video)
White (L/audio)
Red (R/audio)
continued
Loading ...
Loading ...
Loading ...