Loading ...
Loading ...
Loading ...
en Childproof lock
16
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
1. Use the A or @ button to set the time.
The time will stop flashing.
2. Confirm by pressing the v button.
The appliance will apply the time you have set.
Note: You can go to the basic settings to specify
whether or not the time should be shown on the display.
~ "Basic settings" on page 16
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
v button until the symbol for the time is underlined,
and use the A or @ button to change the time.
AChildproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Notes
You can go to the basic settings to specify whether
you want the option to set the childproof lock.
~ "Basic settings" on page 16
If a hob is connected, it will not be affected by the
childproof lock on the oven.
After a power cut, the childproof lock will no longer
be active.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the D button for approx. 4 seconds.
The symbol for this function will appear on the display.
The childproof lock is now activated.
Note: If a timer duration t has been set, this will
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
D button again for approx. 4 seconds until the symbol
goes out on the display.
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Basic setting Options
™‚
Display the time
= Hide the time
= Display the time*
™ƒ
Audible signal duration
upon completion of a cook-
ing time or timer duration
= Approx. 10 seconds
ƒ = Approx. 30 seconds*
= Approx. 2 minutes
™„
Button tone that sounds
when a button is touched
= off
= on*
™…
Cooling fan run-on time
= Short
ƒ = Medium
= Long*
= Extra long
™†
Amount of time until a set-
ting is applied
= Approx. 3 seconds*
ƒ = Approx. 6 seconds
= Approx. 10 seconds
™‡
Enable childproof lock acti-
vation
= No
= Yes*
™ˆ
Water hardness**
= softened
= soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/l)
= hard (2.5 - 3.8 mmol/l)
= very hard* (above 3.8 mmol/
l)
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
Loading ...
Loading ...
Loading ...