Loading ...
Loading ...
Loading ...
Additional Information
masterpage:Right
lename[C:\Documents and Settings\pc13\Desktop\Data_HT-
800DP\J9041614_4252273111HT6800DP\4252273111\GB09ADD_HT-6800DP-U.fm]
49
US
model name1[HT-6800DP]
[4-252-27311(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both channels driven, from
120 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
Power Output
1)
(8 ohms 1 kHz, THD 10%)
FRONT
2)
: 120 W/ch
CENTER
2)
: 120 W
SURR
2)
: 120 W/ch
SURR BACK
2)
: 120 W
1) Measured under the following conditions:
120 V AC, 60 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Reproduction frequency range:
28 – 20,000 Hz
Tone
To clear See
All memorized settings page 17
Customized sound fields page 32
Specifications
MULTI CH IN,
SA-CD/CD, MD/TAPE,
DVD, VIDEO 1, 2
Sensitivity: 800 mV
Impedance: 50 kiloohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/CD
(Optical)
Sensitivity: –
Impedance: –
MD/TAPE (OUT),
VIDEO 1 (AUDIO OUT)
Voltage: 800 mV
Impedance: 10 kiloohms
SUB WOOFER Voltage: 2 V
Impedance: 1 kiloohm
Gain levels ±6 dB, 1 dB step
continued
GB01COV_HT-6800DP-U.book Page 49 Tuesday, March 23, 2004 6:02 PM
Loading ...
Loading ...
Loading ...