Loading ...
Loading ...
Loading ...
Part names and
functions
A
C
B
D
Power plug
M N
U
sed when registering the smart
plug to the hub.
Power outlet
M N
(on/off)
LED indicator
Turns the connected device on
and off. Also serves as the LED
indicator.
LED indicator
Y
ou can use the LED indicator to
confirm the smart plug’s status.
Indicator Status
Off No power, smart
p
lug is off, or LED
indicator is turned
off
*1
Green, lit
Smart plug is on
*
1
Indicator Status
Green,
b
linking
Registration mode
Red, blinking Smart plug is out of
r
ange of the hub
Red, blinking
q
uickly
Connected electric
device is drawing
too much current or
wattage
*2
*1 You can configure the smart plug
so that its LED indicator does not
light during normal operation. For
more information, refer to the
User’s Guide (page 10).
*2 In this case, the smart plug will
turn off automatically. To turn the
smart plug on again, disconnect it
from the power outlet, disconnect
the connected electric device, and
then connect the smart plug to the
power outlet.
Setup overview
1 Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2 Connection
Connect the smart plug to the
power outlet and connect the
desired electric device to the smart
plug.
3 Registration
Required only if the smart plug
was purchased separately (i.e.,
not as part of a bundle).
7
Setup
HNA101AZ_(en_en)_0409_ver.110.pdf 7 2015/04/09 16:46:20
Loading ...
Loading ...
Loading ...