Loading ...
Loading ...
Loading ...
14
ENGLISH
ASSEMBLING AND PREPARING
Lifting and Moving the TV
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
• Avoid touching or applying pressure to the
screen at all times, as this may result in
damage to the screen.
• Do not place the product on the floor with its
front facing down without padding. Failure to
do so may result in damage to the screen.
CAUTION
• It is recommended to move the TV in the
box or packing material that the TV originally
came in.
• Before moving or lifting the TV, disconnect
the power cord and all cables.
• When holding the TV, the
screen should face away from
you to avoid damage.
• Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grille area.
• Use at least two people to
move a large TV.
• When transporting the TV by
hand, hold the TV as shown in
the following illustration.
• When transporting the TV, do not expose the
TV to jolts or excessive vibration.
• When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.
Setting Up the TV
You can mount your TV to a wall or attach
the stand if you wish to place the TV on an
entertainment center or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use
the following instructions to attach the stand.
• When attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
• Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the TV may tilt forward after being
installed.)
• Do not tighten the screws with too much
force; otherwise they may be damaged and
come loose later.
CAUTION
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
NOTE
1
A stand base
1
2
B stand
base
1
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2
Attach the stand to the TV using the lower
connection on the back of the TV.
Loading ...
Loading ...
Loading ...