Loading ...
Loading ...
Loading ...
6
STEP 5
Adjust tilt angle and secure with small Allen wrench (M-K).
STEP 7
Brick/Concrete Wall Installation:
Position ceiling plate against wall and mark drill locations
with a pencil. Drill 2.4” (60mm) deep holes using a 3/8”
(10mm) drill bit. Press concrete anchors (W-B) into holes.
Mount ceiling plate using screws (W-A) and washers (W-C).
STEP 6
Attach mounting bracket (C) to telescopic pole in alternate position using x4 M5x10 screws (M-A) and
x4 D5 washers (M-H), and tighten with small Allen wrench (M-K).
M- K
+8°
-8°
M- A
M- H
M- K
W- A
W- C
W- B
Loading ...
Loading ...