Loading ...
Loading ...
Loading ...
Installation
33
Attaching the front panel
The front of the deflector plate can be
fitted with a front panel to match
existing kitchen furniture units.
The front panel must not exceed
1300g. This applies to front panels with
a depth of up to 30mm. For larger and
heavier front panels, the weight must be
reduced, e.g. by machining it away at
the back.
A DML 400 installation kit, available as
an optional accessory, is required for
fitting a front panel.
Follow the installation instructions
supplied.
Aligning the deflector plate
The position of the deflector plate can
be brought forward by up to 35mm
using the adjusting screws on either
side of the deflector plate. This allows
the deflector plate to be aligned to the
front of the kitchen furniture units on
either side.
Use a screwdriver to align the
deflector plate correctly.
Loading ...
Loading ...
Loading ...