Loading ...
Loading ...
Loading ...
22
Table of Contents Useful Recording Techniques Index
If the button you touch does not react correctly, calibrate the touch panel (p. 131).
Once the clock is set, the clock time is automatically adjusted with [AUTO CLOCK ADJ] and [AUTO
AREA AD
J] set to [ON] (p. 96). The clock may not be adjusted to the correct time automatically,
depending on the country/region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and
[AUTO AREA ADJ] to [OFF] (HDR-XR500V/XR520V).
To turn off the power
Close the LCD screen. The (Movie) lamp flashes for a few seconds, and the power is turned
off.
POWER
You can turn off your camcorder also by pressing POWER.
If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below.
On turning the camcorder on or off using the LCD screen or the viewfinder
The power of the camcorder is turned on or off depending on the status of the LCD screen or
the viewfinder.
Status Power of the
camcorder
LCD screen Viewfinder
Open Retracted On
Pulled out On
Closed Retracted Off
Pulled out On
Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When
you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original
position.
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Touch
(HOME) (SETTINGS) [CLOCK/ LANG] [ LANGUAGE SET]
a desired language
.
Loading ...
Loading ...
Loading ...