Loading ...
Loading ...
Loading ...
18
Charcoal filter saturation alarm (Optional)
• After one hundred and twenty functional hours of the fan, the display will show “Charcoal Filter” if the fan is active. When
this icon flashes on display, the charcoal filters installed are required to be replaced or reactivated.
• To reset the charcoal filter saturation indication the user must press the “-” button for 5 seconds, after this time the icon
“Charcoal filter” is not displayed and the hood has the normal display operation.
Audible signal activation and deactivation
• The audible signals can be activated or deactivated pressing the “Light” button for 5 seconds.
• If the audible signal is activated, a tone must sound and the “Snd” symbol must appear on the display for 3 seconds.
• If the audible signal is deactivated, the “Snd” symbol must appear on the display for 3 seconds and no tone must sound.
Charcoal filter inclusion and exclusion (Recirculating accessories)
• The charcoal filter inclusion or exclusion can be set by pressing the “+” and “-” buttons at the same time for 5 seconds.
• The Inclusion or exclusion of charcoal filter must be selected while the lamps and the motor are OFF.
• When the charcoal filter has been excluded, the charcoal filter alarm is disabled.
Heat sensor
• The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat occurs (over 158° F
or 70°C) surrounding the control area.
• If the blower is OFF or if it is operating at first or second speed, the blower will be set automatically to third speed, the
display shows the word "CArE" to indicate that heat sensor has detected an excessive heat.
• During this state, the user may raise the blower speed to fourth speed but can not decrease the speed.
• When the temperature level on the hood drops to normal, the blower will operate in the setting defined by the user before the
alarm occured.
Loading ...
Loading ...
Loading ...