Loading ...
Loading ...
Loading ...
29
6 Select a connected device on the left of
the menu, then press
.
7 Select the connector that is used for the
device, then press OK .
8 Press , then repeat the previous two
steps to map other connected devices.
9 Select [Finish] to exit.
Update audio mapping from
connected devices
If you have already mapped audio from
connected devices (see ‘Map audio from
connected devices’ on page 29 ) , you can use
this procedure to update your mapping.
1 Press , select [Settings] , and then press
OK .
2 Select [EasyLink Setup] > [Audio Input
Mapping] , then press OK .
3 Select a connected device, then press .
4 Select the connector that is used for the
device, then press OK .
5 Press , then repeat the previous two
steps to map other connected devices.
6 Select [Finish] to exit.
Aux2
Aux1
Aux3
Coaxial
Optical
Philips TV
DVD player
Recorder
Enable one-touch standby
When you press and hold ( Standby ) for
at least three seconds, the connected HDMI
CEC devices switch to standby.
Note
When one-touch standby is turned off, the •
home theater cannot be switched to standby
by a remote control from the TV or other
devices.
1 Select [EasyLink Setup] > [One Touch
Standby] , then press
.
2 Select an option, then press OK .
• [On] - Enable one-touch standby.
• [Off] - Disable one-touch standby.
Map audio from connected devices
You can map your home theater to the audio
output from connected devices.
Note
The home theater must be connected to the •
devices by HDMI.
The connected devices must be turned on.
•
1 Press , select [Settings] , and then press
OK .
2 Select [EasyLink Setup] > [System Audio
Control] , then press
.
3 Select [On] , then press OK .
4 Read the on-screen instructions and
select [Continue] to con rm scanning.
The home theater scans for devices »
and then displays a list of connected
devices.
5 Select [Continue] .
A menu like the following is displayed. »
English
EN
Loading ...
Loading ...
Loading ...