Pro-Ject TUBEBOXS2SIL Sumiko Tube Box S2 Silver Tube Phono-Preamplifier

User Manual - Page 4

For TUBEBOXS2SIL.

PDF File Manual, 5 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
© Pro-Ject Audio Systems · Pro-Ject Tube Box S2 · Revision 2017.12.5
4
Front panel controls
Stand-By
The button on the left side of a front panel of the unit turns the unit on or returns it to standby mode. The blue
LED above the stand-by push button shows that the unit is switched on.
Gain setting
Buttons marked with and set gain of the amplifier. Selected value is indicated by LED. Possible settings
are 40, 43, 50, 53, 60 and 63dB.
Subsonic
The button on the right side of a front panel turns on and off subsonic filter. The blue LED above the button is
illuminated when it´s on.
Technical specifications Pro-Ject Tube Box S2
A
Typical for low output MC cartridges,
B
typical for MM or high output MC cartridges
* Input capacitance is irrelevant for low-output MC cartridges
Tubes: 2 x ECC83 (12AX 7A)
Input impedance: 10ohms, 100ohms, 1kohm, 2kohms
A,
Input capacitance/impedance: 47pF, 147pF, 267pF, 367pF,487pF and 587pF*/47kohms
B
Together with other input impedance settings without any influence!
Input gain: 40dB,43dB
B
; 50dB, 53dB and 60dB, 63dB
A
Noise floor: 80dB (A weighted) at 40dB input gain
75dB (A weighted) at 50 dB and 63dB input gain
THD: <0,02% at 40dB input gain
<0,05% at 50dB and 63dB input gain
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,4dB
Subsonic filter: at 20Hz with 18dB/octave
Input: 1 pair RCA/phono sockets
Line-level output: 1 pair RCA/phono sockets
Outboard power supply: 18V/1.000mA DC, suitable for your country's mains supply
Power consumption: 470mA DC, <1W in standby
Dimensions W x H x D (D with sockets): 103 x 73 x 119 (131)mm
Weight: 410g without power supply
Loading ...