Subaru 2007 Legacy 2.5i Wagon

User Manual - Page 103

For 2007 LEGACY 2.5I WAGON.

PDF File Manual, 442 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Black plate (104,1)
Model "A2420BE-B" EDITED: 2006/ 7/ 26
2-12 Keys and doors
Transmitter circuit board
To register a new transmitter with the
keyless entry system, it is necessary to
program the transmitters code (identifica-
tion number) into the system. A label
showing the code is affixed to the bag
containing the transmitter, and another is
affixed to the circuit board inside the
transmitter. If there is no bag, open the
transmitter case and make a note of the
eight-digit number. Program the number
into the system in accordance with the
following procedure:
1. Firmly close the doors and the rear
gate (Station wagon) or trunk lid (Sedan).
2. Open the drivers door, sit on the
drivers seat, and close the door.
3. Perform the following steps within 45
seconds.
(1) Open and close the drivers door
once.
1) LOCK
2) ON
(2) Insert the key into the ignition
switch, then turn it from the LOCK
position to the ON position 10 times
within 15 seconds.
NOTE
. When you complete step (2), an
electronic tone will sound once.
. If you do not perform steps (1) and
(2) within 45 seconds, an error will
occur. An electronic tone will not
sound. In this event, perform the whole
procedure again beginning with part 1.
4. Open and close the door once within
15 seconds.
NOTE
. When part 4 of the procedure is
completed, an electronic tone will
sound for 30 seconds.
. If you do not perform the operations
in part 4 within 15 seconds, an error
will occur and the electronic tone will
not sound. In this event, perform the
registration steps again beginning with
part 3 of the procedure.
Loading ...
Loading ...
Loading ...