Loading ...
Loading ...
Loading ...
7
Empty the pan. Place the Chill/Thaw
tray in the pan. Place the items on the
tray and close the pan completely.
Select the ExpressThaw,
™
ExpressChill
™
or SelectTemp
™
pad. The display and
SET light will come on. Tap the pad
until the light appears next to the
desired setting. Use the chart to
determine the best setting to use.
■ To stop a feature before it is
finished, tap that feature’s pad
until no options are selected and
the display is off.
■ During ExpressThaw
™
and
ExpressChill,
™
the display on the
controls will count down the time
in the cycle.
■ After the ExpressThaw
™
cycle is
complete, the pan will reset to the
MEAT setting (31°F) to help preserve
thawed items until they are used.
■ The displayed actual temperature of
the CustomCool pan may vary slightly
from the SET temperature based on
usage and operating environment.
NOTE: For food safety reasons, it is
recommended that foods be wrapped
in plastic wrap when using ExpressThaw.
™
This will help contain meat juices and
improve thawing performance.
About CustomCool
™
. GEAppliances.com
The CustomCool
™
feature is a system of
dampers, a fan, a temperature thermistor
and a heater. Depending on the function
selected, a combination of these will be
used to quickly chill items, thaw items or
hold the pan at a specific temperature.
The pan is tightly sealed to prevent the pan’s
temperature from causing temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located at the
top of the refrigerator with the temperature
controls.
How to Use
How it Works
ExpressThaw
™
To remove:
Pull the drawer out to the stop position.
Lift the front of the drawer up and out
of the wire holder.
Lift the back of the drawer up and out.
To replace:
Place the back of the drawer in the wire
holder, making sure the wire holder
fits into the grooves on the back of
the pan.
Lower the front of the drawer into the
wire holder.
Pull the bottom of the wire holder
forward until the wire pops into the
groove located on the bottom of
the drawer.
How to Remove and Replace the Drawer
ExpressChill
™
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
Pop wire into groove
Loading ...
Loading ...
Loading ...