Loading ...
Loading ...
Loading ...
13
EN
Do not allow the power cord to hang down or come into contact with
the hot parts of the oven.
Do not unplug the appliance by pulling on the power cord.
Do not leave the power cord close to or in contact with sources of heat
or sharp edges.
Do not use an extension lead. If you accept liability for doing so, only
use an extension lead which is in good condition, has a plug with an
earth connection and is suited to the power rating of the appliance.
Unplug the appliance when it is not in use.
In order to avoid the risk of electric shocks; do not immerse the cord, the
plug or the appliance itself into water or any other liquid.
Do not place the appliance close to any heat source or near to any
electrical elements. Do not stand the appliance on top of any other
appliance.
Use the handles and the buttons; use oven gloves if necessary.
Be careful when opening and closing the door of your oven: any violent
shock or excessive stress caused by variations in temperature may break
the glass parts. These parts are made of toughened glass in order to
avoid any risk of spray and thus avoid danger to the user.
Never place any plates on the glass of your oven when it is open.
Should any parts of the product catch fire never try to extinguish the fire
with water. Unplug the appliance and do not open the door. Smother
the flames with a damp cloth.
Do not store any inflammable products close to or underneath the
furniture unit where the appliance is located.
Do not operate the appliance under a wall unit, shelving, or close to
inflammable materials such as blinds, curtains, drapes…
Do not use the appliance as a heat source.
Never place paper, cardboard, or plastic in the appliance and never put
anything on top of it (utensils, grill, objects, hot dishes after cooking…).
Do not put any aluminium foil under the appliance to protect the
work surface, nor between the heating elements, nor in contact with
the inside walls or the elements, because you run the risk of seriously
damaging the oven or the work surface.
Never insert anything into the ventilation ducts and do not obstruct
them.
Do not use any powerful cleaning products (notably soda based
strippers), nor brillo pads, nor scourers.
Loading ...
Loading ...
Loading ...