GE Consumer & Industrial
Appliances
Installation Instructions
Dishwasher 1/4" Custom Panel Trim Kit
GPF525 Series
GPF525B-Black Trim Kit, GPF525C-Bisque Trim Kit, GPF525W-White Trim Kit
IMPORTANT – Save these instructions for local
inspector’s use.
IMPORTANT – Observe all governing codes and
ordinances
Note to Installer – Be sure to leave these instructions with
the Consumer.
Note to Consumer – Keep these instructions with your
Owner’s Manual for future reference.
Stop Sign
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
WARNING:
To prevent electric shock, disconnect electrical power
supply to dishwasher before changing panels. Do not
operate dishwasher while changing panels or when
toekick assembly is removed.
TOOLS AND MATERIALS REQUIRED:
• 1/4" socket driver
• Phillips screwdriver
• Electric drill
• 1/8" drill bit
• Masking tape
• Safety Glasses
• Gloves to protect against sharp edges
KIT INCLUDES:
• Installation Instructions
• Left, right, top and bottom door trim
• 8 – 18 x 5/16" color-matched screws
IMPORTANT!
The factory supplied door springs must
be replaced with two WD03X10012 door
springs if the custom panel weighs more
than 3.5 pounds. Order these springs at
GE.COM or call 1-800-626-2002. Refer to
Step 4 for more information
Loading ...
Loading ...
Loading ...
