GE - General Electric PDW1800KBB GE Profile Series 18" Built-In Dishwasher

User Manual - Page 15

For PDW1800KBB.

PDF File Manual, 20 pages, Read Online | Download pdf file

PDW1800KBB photo
Loading ...
Loading ...
Loading ...
49-55105 15
Care and cleaning
USING THE DISHWASHER
Cleaning the Filters
Inspect and clean the filters periodically. This should
be done every month. If there is a decrease in wash
performance or dishes feel gritty, this is also an
indication the filters need to be cleaned.
To clean the filters, remove the bottom rack. Lift out the
main filter and cup assembly. Lift out the fine filter.
Rinse the main filter, fine filter and cup with warm soapy
water. Scouring pads or brushes can scratch the filter
surface but a soft brush or sponge may be needed to
remove stubborn soils or calcium deposits caused by
hard water.
Once cleaned replace the fine filter followed by the cup
and main filter assembly. Be sure to press them in place
as improper replacement of the filter may reduce the
performance level of the appliance.
Cleaning the Spray Arms
Because hard water chemicals will clog the spray arm
jets and bearings, it is necessary to clean the spray arms
regularly. To remove the spray arm, twist the retaining
nut 90 degrees and pull the spray arm off the shaft.
Wash the arms in soapy, warm water and use a soft
brush to clean the jets. Replace them after rinsing
thoroughly.
Protect Against Freezing
If your dishwasher is left in an unheated place during the
winter, ask a service technician to:
1
Turn off electrical power to the dishwasher. Remove
fuses or trip circuit breaker.
2
Turn off the water supply and disconnect the water inlet
line from the water valve.
3
Drain water from the water inlet line and water valve.
(Use a pan to catch the water.)
4
Reconnect the water inlet line to the water valve.
Does Your Dishwasher Have an Air Gap?
An air gap protects your dishwasher
against water backing up into it if a drain
clogs. The air gap is not a part of the
dishwasher. It is not covered by your
warranty. Not all plumbing codes require
air gaps, so you may not have one.
The air gap is easy to clean.
1
Turn off the dishwasher and lift off the air gap cover.
2
Remove the plastic cap under the cover and clean with a
toothpick.
3
Replace the cap and cover when the air gap is clean.
Main filter
Cup
Fine
filter
Retaining
nut
Washer
Retaining nut
Upper rack
Check the air gap any
time your dishwasher
isn’t draining well.
Air gap
Loading ...
Loading ...
Loading ...