User Manual Insignia NS-EK17BK9 1.7L Electric Kettle

Documents for Insignia NS-EK17BK9

The following documents are available:
User Manual Photos
NS-EK17BK9 photo
USING YOUR ELECTRIC KETTLE
1 Pull the power cord out of the power base, then connect the
plug to a power outlet.
Note: The power cord is stored in the power base and can be
adjusted to the length you need.
2 Press the power switch down to turn on the kettle. The light
turns on and the water begins to heat.
After the water has boiled, the kettle turns o automatically and
the light turns o.
To shut o the power, lift the power switch to the o position.
Note: Make sure that the power switch is clear of obstructions and
the lid is rmly closed. Otherwise, your kettle will not turn o.
3 Lift the kettle from the base, then pour the water.
Note: The kettle will not re-boil until the switch is turned on. Let the
kettle cool for 15~20 seconds before trying to reheat the water.
WARNINGS:
Use caution when pouring the water from your kettle. Contacting
boiling water may result in a serious burn.
Do not open the lid while the water in the kettle is hot.
Boil-dry protection
If you try to operate the kettle without water, the boil-dry protection
automatically turns it o. If this should occur, let your kettle cool before
lling with cold water.
FILLING YOUR ELECTRIC KETTLE
Notes:
Before using your electric kettle for the rst time, clean your kettle by
boiling two full kettles of water, then discarding the water.
Never ll the kettle with any liquid other than water.
1 Place the base on a at, heat resistant surface, as close as
possible to a power outlet.
2 Remove the kettle from the base and open the lid by pulling up
on the recessed handle on the lid.
3 Fill with the desired amount of water.
4 Close the lid. Place the kettle on the base, making sure that the
kettle contacts the base completely.
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
1.7 L electric kettle
Power base with power cord
Note: The base and cord are packaged inside the kettle for
shipping.
Quick Setup Guide
QUICK SETUP GUIDE
1.7-Liter
Electric Kettle
NS-EK17BK9
FEATURES
Cordless kettle lifts from a corded base to easily ll and serve
hot water
Cord stores inside the base and adjusts to the length you need
Locking lid stays in place while you pour
Blue illuminated power switch silently turns o after your water
boils
Auto-shuto prevents your kettle from boiling dry
BPA-free materials keep your family safe from contaminants
1.7 L (1.8 qt) capacity heats enough water for everyone
Water level indicator measures the water in your kettle
1500W of power boils a full kettle (1.7 L/1.8 qt) in eight minutes
and .5 qt (.5 L) in three minutes
1.7L
MAX
1.0L
0.5L
MIN
Notes:
Always ll the kettle between the minimum (0.5L)
and maximum (1.7L) marks. Too little water results
in the kettle turning o before the water has
boiled. Too much water results in boiling water
ejecting.
Make sure that the lid is rmly in place before
connecting the power cord to the outlet.
ON
OFF
Power switch
and light
Lid
Spout
Recessed handle
Handle
Power switch & light
Power cordPower base
Loading ...
Loading ...
Loading ...

Specifications

Insignia NS-EK17BK9 Questions and Answers


#1 Will this work when plugged in a 220V outlet outside the US?

No, this unit uses a 120VAC power connection.

#2 Once hot, how long does the water stay hot in the pot? Will it stay warm for hours or cool quickly?

It will cool quickly. It isn't insulated, nor is there a "keep warm" option.

#3 Can you use for coffee?

Yes, I do all the time and for making jello-it heats the water boiling

#4 How does the filter attach?

No matter what you do the filter will not stay in place. Throw it away or it will fall in the water and eventually touch the heating element and melt.