Loading ...
Loading ...
Loading ...
5
ENGLISH
MANUAL MODE
During the manual mode the built-in scale is deactivated. This mode is recommended for
grinding straight into portalters for espresso extractions.
1. Press the START/STOP
button to start grinding. The display will begin counting up
time during operation until you stop. (fig 19)
2. Once the desired quantity has been reached, press again the START/STOP
button
to stop the operation. (fig 19)
NOTE: To obtain additional ground coffee, repeat the operating cycle. Always rst
make sure that the ground coffee does not go above the maximum capacity of the
container(100g/3.55oz)
WEIGHT MODE
1. Set the quantity of ground coffee using the - & + buttons until you reach the desired
weight (up to 100g). To adjust the quantity faster, simply hold the – or + button
accordingly. (fig 18)
2. Press the START/STOP button to start grinding. The display will ash during operation
and the scale will start weighting the coffee grind on display. (fig 18)
3. Once the selected quantity has been reached, the appliance will stop automatically.
NOTE:
If you want to stop the appliance before grinding is complete, press the
START/STOP
button. To resume the operation, press the START/STOP button
again and it will continue the cycle until completion
If you remove the coffee ground in the container, it will reset the scale and start the cycle
over.
4. Remove the ground coffee holder, tap the container gently, remove the lid and pour the
ground coffee into the lter of the coffee maker or use a measuring spoon. (fig 17)
5. To obtain additional ground coffee, adjust the desired quantity and resume operation.
You can also empty your container and repeat the operation.
NOTE: The coffee grinder will display the last selected setting.
NOTE: If you want to use the dripper provided or another container please refer to the
TAREFUNCTION paragraph.
TARE FUNCTION
Your coffee grinder is designed to be used with the original bean container. If the original
bean container is not empty or if you are using another container, you will be notied with
the Warning
indicator in the display and won’t be able to start grinding until the grinder
has been tared/zeroed out.
If you want to use the dripper provided or another container, you must reset the scale using
the TARE button prior to selecting the weight and start operation.
1. Place the new recipient on the scale (fig 9)
2. Reset the unit using the TARE button. (fig 21)
3. Once the scale is reset, the Warning
button will turn off. (fig 22)
Loading ...
Loading ...
Loading ...