Loading ...
Loading ...
Loading ...
en Troubleshooting
34
Fault Cause troubleshooting
Water is dripping from the
brewing unit.
T DISC is damaged, leaking
or not correctly pierced.
▶
Use a new TDISC.
▶
Only use T DISCs once.
1. Wait until the brewing process has
come to an end and the appliance
has cooled down.
2. Remove the T DISC.
3. Clean the brewing unit.
→"Cleaning the appliance",
Page31
The piercing unit is not inser-
ted correctly.
▶
Press the piercing unit into the
holder using both thumbs until it
clicks audibly into place.
There is water under the cup
stand.
Condensation has formed
due to technical reasons.
▶
Remove excess water with a soft
cloth.
Information on display panel
Fault Cause troubleshooting
No LED is lit. Appliance is in idle mode.
▶
Press .
All LEDs flashing. Voltage in the house system
is incorrect.
1. Pull out the mains plug and re-insert
it.
2. If the problem persists for a longer
period, have the voltage of your
property checked by an electrician.
LED lights up.
Water tank has not been suf-
ficiently filled.
1. Fill the water tank with fresh, cold
water up to the mark .
2. Insert the water tank.
LED lights up even
though there is enough wa-
ter in the water tank.
Float is stuck in the water
tank.
1. Descale the appliance.
→"Descale the appliance",
Page31
2. Reach into the water tank and
move the float up and down.
Water tank is wrongly inser-
ted.
1. Insert the water tank correctly.
2. Push the water tank into the appli-
ance until it clicks into place.
LED lights up.
Build-up of limescale in the
appliance.
▶
Descale the appliance.
→"Descale the appliance",
Page31
Loading ...
Loading ...
Loading ...