Solid Red → Charging Blink Red x 1 → Low Battery Slow Blink Blue → Ready to Pair Fast Blink Blue → Connected
LED 1 → Charging 0-33% LED 2 → Charging 33-66% LED 3 → Charging 66-100%
Solid Red
Blink Red x 1
Slow Blink Blue
Fast Blink Blue
LED
Charging
Low Battery
Ready to Pair
Connected
CONTROLS
Transparency On/Off
Voice Assistant
DURING PLAYBACK
CALL HANDLING
*During Call
SINGLE CONTROLS
Voice Assistant
Power Off
Transparency On/Off
*During Call
Short Press
Long Press
Double Press
During Playback
Voice Assistant
Call Handling
During Call
POWER OFF
TRUE WIRELESS RESET
BLINKING RED
PURPLE
FACTORY RESET
HOLD 8 SECONDS
MOISTURE REMOVAL SYSTEM
The desiccant pod at the top of the case is filled with moisture absorbing crystals. These crystals are made from silica gel and periodically need to be reactivated.
WARNING: DO NOT EAT DESICCANT!
REACTIVATING MOISTURE DESICCANT
TO REACTIVATE:
Microwave oven:
Remove pod from the charging case.
Place pod in microwave, holes up, and heat for 30 seconds on high. Let cool to the touch.
Replace pod into the charging case.
WARNING: Never heat desiccant for longer than two (2) minutes total. Let cool before handling.
NOTE: After several cycles, the crystals lose their ability to absorb moisture. Replacement desiccant pods are available from Klipsch.
PLACEMENT
INSTALLING EAR WING
TROUBLESHOOTING
TOPIC: There is sound coming from one side only.
SOLUTION: Insert the other earphone into the case and take it out again. If this fails, follow “True
Wireless Reset” procedure on Page 8.
TOPIC: How do I get the best Bluetooth connection?
SOLUTION: Ensure your device isn’t being blocked by your body or any objects (move it from your pocket). Next, place the earphones back in the case and take out the earphone that corresponds with the side your device is on first (Right earphone if right pocket, left earphone if left pocket).
Try to reduce the distance between your earbuds and your audio device to further improve performance.
TOPIC: What if I have poor wireless connectivity?
SOLUTION: If possible, move away from cell phone towers, dense WiFi networks, other Bluetooth devices and household appliances like microwave ovens.
TOPIC: I want more bass.
SOLUTION: Try a larger ear tip, further boost bass using the Klipsch Connect App.
TOPIC: I can’t connect to my phone.
SOLUTION: Factory reset the earphones by holding the button on both left and right for 8 seconds.
They will flash red/blue/red/blue and turn off.
Next, press both earphones simultaneously for 1 second to power them on,
TOPIC: My audio and video won’t sync up.
SOLUTION: Some apps do not always use the correct audio codec for lowest latency. If the audio is delayed in an App, try streaming the same video using your device’s web browser.
TOPIC: Are my earphones water and dust resistant?
SOLUTION: Your earphones are IP67 water and dust proof which means they can handle rain, mud, and other adventures. Saltwater and corrosive chemicals will damage the earphones and should be washed off with fresh water immediately.
ADDITIONAL SUPPORT:
Be sure to check klipsch.com/support and download Klipsch Connect to install the latest firmware available.
