Loading ...
Loading ...
Loading ...
4
The Maestro Kettle features the Sunbeam Quiet
Shield which is new and exclusive quiet boil
technology designed to make boiling water a
peaceful practice.
The Sunbeam Quiet Shield
®
is a stainless steel
disk attached to the kettle floor which acts as
a diffuser plate. It is perforated with a range of
holes which help disperse, and reduce the size
of, the water bubbles thus significantly
reducing the noise of the boiling process.
Maintaining the Quiet Boil Technology.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible but phosphate scale isn’t generally
visible although may cause the water to
appear cloudy when heated.
Regular use of the kettle can lead to the
build-up of these minerals which reduces the
effectiveness of the Sunbeam Quiet Shield
®
as well as the performance of the kettle.
It is important to descale your kettle regularly
to maintain the
Quiet Shield
®
and to
prolong the life of
the kettle.
Sunbeam
recommend that the
kettle is descaled
every 4-6 weeks. Go
to page 6 for more
information on how
to descale your
Maestro Kettle.
Always disconnect the kettle from the power
outlet before cleaning.
Never immerse the kettle switch area, cord or
power base in water, or allow moisture to
come into contact with these parts.
Descale Your Kettle Regularly.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible but phosphate scale isn’t generally
visible although may cause the water to
appear cloudy when heated. This may cause
the interior of the water gauge to discolour,
cause overheating, trigger the boil-dry cut-out
mechanism or even reduce the kettle’s life.
Even in soft water areas it is important to
descale your kettle regularly to help
maintains its lifecycle.
NOTE: Failure to descale products regularly can
be deemed as negligent handling and any
faults caused by mineral build up will not be
covered by the Sunbeam 12 Month Guarantee.
To remove this build-up, use Sunbeam Liquid
Descaler, a simple to use, non-toxic cleaner
available from Sunbeam Appointed Service
Agents.
Alternatively:
1. Fill the kettle with 1 cup of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2. Empty the solution from the kettle. Any
stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill
the kettle with clean water, bring to boil
and then discard the water. Repeat and the
kettle will then be ready to use.
To clean the stainless exterior
The stainless steel surface may be wiped over
with a damp cloth and polished with a soft
dry cloth.
CAUTION: Do not use chemicals, steelwool, or
abrasive cleaners to clean the outside of the
kettle, as these will scratch the stainless
steel surface.
To clean the mesh filter.
Press the button on the handle to open the
hinged lid. Grasp the top of the mesh filter
and pull upwards to remove. Wash in warm
soapy water and dry thoroughly before
replacing in the kettle.
Care and Cleaning
Loading ...
Loading ...