Loading ...
Loading ...
Loading ...
8
Note: If required you may lay the
refrigerator on its back in order to gain
access to the base, you should rest it on
soft foam packaging or similar material to
avoid damaging the backboard of the
refrigerator. To reverse the door, the
following steps are generally
recommended.
1. Stand the refrigeratorupright. Open the
door to take out all door racks (to avoid
damage) and then close the door.
Caution!
Please slightlysqueeze the door rack
from two sides toward center and inside
of door rack, and then move it upward
when taking out the upper rack and
lower rack.
2. Remove right upper hinge cover
①
top of the cabinet. Remove the 3 screws
②
which are used for fixing the right
upper hinge part (see the picture below)
and take down the upper hinge parts
③
3. Remove screw cover from the
left-front corner of cabinet with
thin-blade screwdriver and install screw
cover-right to the right front corner. Put
theupper hinge cover(right) and upper
hingepart (right) into the plastic bag.
4. Remove the upper door from the
middle hinge by carefully lifting the door
straight up.
5. Place the upper door on a smooth
surface with its panel upwards.
Loosen screws
②
and take down part
③
and part
①
,install left door
left door with included screws
③
①
and
②
with the
appliance for futurereference.
Catcher and left DoorStopper to the
.
Keep part
Loading ...
Loading ...
Loading ...