Loading ...
Loading ...
Loading ...
10
3. Check the levelness of the washer by placing a level on the
top edge of the washer, first side to side then front to back.
If the washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wooden block and adjust the front feet height
moving the hexagonal plastic part as necessary. Repeat to
adjust back feet.
4. Ma
ke sure all four feet are stable and resting on the floor. Then
check that the washer is perfectly level (use a level). Repeat
steps 1-3 until washer is level.
5. After the
washer is level, and all four feet are in firm contact
with the floor, use a
9
/16" (14 mm) open-end wrench to turn the
locknuts on the feet, tightly against the washer cabinet.
IMPORTANT: All f
our feet must be tightened. If the locknuts are
not tight against the washer cabinet, the washer may vibrate.
6. The washer should not mov
e front to back, side to side, or
diagonally when pushed on its top edges.
7. Con
firm the levelness of the washer.
Complete Installation
1. Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See “Electrical Requirements.”
2. Che
ck that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
3. Check that you have all of your tools.
4. Di
spose of/recycle all packaging materials.
5. Chec
k that the water faucets are on.
6. Chec
k for leaks around faucets and inlet hoses.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
re, or electrical shock.
WARNING
7. Plug into a grounded 3 prong outlet.
8. Read “Washer Use.”
9. T
o test and to clean your washer, measure ½ the detergent
manufacturer’s recommended amount of High Efficiency (HE)
detergent for a medium-size load. Pour the detergent into the
detergent dispenser. Select NORMAL/CASUAL, and then
select START. Allow the washer to complete one whole cycle.
Use only HE High Efficiency detergent.
Loading ...
Loading ...
Loading ...