Loading ...
Loading ...
PLAY/PAUSE BUTTON: This button has multiple functions – a visual indicator of network connectivity and a PLAY/
PAUSE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. For an ungrouped Player, press
the button to Play and Pause the stream. If listening to an Internet radio stream, the Pause function will work for 30
seconds. At this point, the buffer is full and the stream will Stop. When a Player is grouped, pressing the PLAY/PAUSE
button will Mute that Player while other Players continue the stream. The Player’s LED will flash blue when muted.
+, - (VOLUME): Toggle either button to vary volume level. Volume level will not change if you press and hold either
button.
(+): Increase volume level
(-): Decrease volume level
PREVIOUS TRACK/NEXT TRACK: These buttons can be used to go back to the previous track◄◄ or skip to the
next track ►► in your current playlist.
LAN PORT: The LAN PORT connection can be used with the Ethernet cable provided. This is an optional connection
since the PULSE 2i can be connected to the network through a Wi-Fi connection to your router. To setup the PULSE 2i
using the LAN Port a Wired Ethernet connection is required. Using the Ethernet cable provided, connect one end of the
Ethernet cable to the LAN port of your wired Ethernet broadband router and the other end to the PULSE 2i’s LAN port.
USB (TYPE A): Connect a USB mass storage device to the USB input. Typical USB mass storage devices
compatible with the PULSE 2i include portable flash memory devices and external hard drives (FAT32 formatted).
OPTICAL IN/ANALOG IN: Using a 3.5mm Stereo Audio Cable (not provided), connect one end to the Analog In of the
PULSE 2i and the other end to the corresponding analog output of other compatible devices. The source will show as an
Analog Input in the Navigation Drawer of the Bluesound app. Using an Optical to 3.5mm convertor (included with the
PULSE 2i), a digital optical source can also be added. This will appear as Optical Input in the Navigation Drawer.
SERVICE: Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player. This is
not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and SERVICE control
button.
HEADPHONE JACK: A 3.5mm headphone jack is located on the back of the PULSE 2i.
AC MAINS INPUT: The PULSE 2i comes supplied with two separate AC power cords. Select the AC power cord
appropriate for your region. Before connecting the plug to the wall outlet, connect firmly the other end of the AC power
cord to PULSE 2i’s AC Mains input socket. Never force the plug into a wall outlet. An adaptor may be necessary in
certain regions. Always disconnect the plug from the wall outlet first, before disconnecting the cable from the PULSE 2i’s
AC Mains input socket.
2
3
4
5
7
6
8
9
10
Loading ...