Loading ...
Loading ...
Loading ...
41
Selecting a Channel
with a Single Key Press
— Channel Macro Function
You can program the Channel Macro
function for the keys listed below (macro
keys).
If you program the operation of entering
the 1, 2, 3 and ENTER keys for a macro
key, you can select the channel 123 by
pressing that single key.
Component Macro key
TV: PIP INPUT, PIP MOVE,
PIP CH+, PIP STILL, PIP
SWAP, PIP CH-
CBL: m, N, M, REC*, x, X
SAT: m, N, M, x, X
* You can program this function for REC key
alone (not on the REC + B key for a double-
key operation).
MENU EXIT
SYSTEM CONTROL
MUTING
LIGHT COMMANDER OFF
RECALL
TV
AMP CD
CBL SAT
MD
DVR
TAPE
VCR
DVD
M1
M2
CHANNEL
VOLUME
OK
ABC
MORE
2
1
5
To receive the data of a
Component Select button from
another remote commander
1~2 Perform Steps 1 and 2 on page
40.
3 Press the 2 key.
4 Press the Component Select
button to which want to assign
the data.
5 Press the ENTER key.
When the data have been received,
“TV” and “r” go off. If the data have
been successfully received, the
backlight of the display turns off.
Notes
• If the Commander is not ready for
receiving the data, press CLEAR key, then
OK key to clear the learned signal on all
or one of the Component Select buttons.
• If “NG” appears during data transfer, go
back to Step 3 and continue the operation
or press COMMANDER OFF to stop the
operation. If you continue the operation,
you have to set the sending remote
commander again to send data.
Continued
Loading ...
Loading ...
Loading ...