Loading ...
Loading ...
Loading ...
Black plate (120,1)
北米Model "A8220BE-B" EDITED: 2016/ 7/ 28
Keys and doors/Keyless access with push–button start system
system have not been used for 2 weeks or
longer while all doors are locked
To recover the keyless access func-
tion:
Operate one of the following items.
– Turn the ignition switch to the “ON”
position
– Unlock the doors by operating any
procedure other than gripping the front
passenger’s door handle
– Lock the doors
– Open a door and then close it
. Case 2: When the access key has
been left in the operating range for 10
minutes or longer while all doors ar e
locked
To recover the keyless access func-
tion:
Operate one of the following items.
– Unlock the doors by gripping the
door handle
– Unlock the doors by pressing the
rear gate opener button
– Lock the doors by touching the door
lock sensor
– Lock or unlock the doors by using
the remote keyless entry system
– Lock or unlock the doors by using
the power door locking switch
– Open either of the front doors
! Door unlock selection function
The door unlock selection function makes
it possible to unlock the driver’s door or
the rear gate without unlocking any other
doors. You can change the setting for the
driver’s door and for the rear gate inde-
pendently.
Operational: Only the driver’s door or the
rear gate will be unlocked.
Non-operational: All doors and the rear
gate will be unlocked.
For the factory setting (default setting),
refer to “Function settings” F25.
NOTE
The setting can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details. Also, for models with
the multi function display, the setting
can be changed by operating the multi
function display. For details, refer to
“Keyless access setting (models with
“keyless access with push-button start
system”)” F3-86.
& Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
For models with the multi function
display, the setting can be changed by
operating the multi function display.
For details, refer to “Keyless buzzer
volume setting” F3-81.
& Warning chimes and warning
light
The keyless access with push-button start
system sounds a w arni ng chim e and
flashes the access key warning light on
the combination meter in order to minimize
improper operations and help protect your
vehicle from theft.
For details, refer to “Warning chimes and
warning light of the keyless access with
push-button start system” F3-25.
2-16
Loading ...
Loading ...
Loading ...