Loading ...
Loading ...
Loading ...
en Microwave
12
Microwave power settings
The following microwave power settings are available.
The microwave power settings do not always
correspond to the exact wattage that the appliance
uses.
Default settings:
The appliance suggests a cooking time for each
microwave power setting. You can accept this value or
change it in the relevant area.
The maximum setting is designed for heating liquids
only; it is not designed for heating food. After a certain
period, the microwave's maximum power is gradually
reduced to 600W to protect the appliance. Full power
is made available again after a cooling period.
Setting the microwave
Example: Microwave output 600W, cooking time
5 minutes.
1. Press the on/off button.
The appliance is ready to use. The maximum
microwave output and a cooking time are displayed
as default values in the display – they can be
changed at any time.
2. Use the rotary selector to select the required
microwave output.
The microwave output and a default cooking time
are shown in the display.
3. Touch the ¿ arrow.
The cooking time can be set.
4. Use the rotary selector to set the required cooking
time.
5. Press the start/stop button to start.
The appliance starts the operation. The cooking time
counts down on the display.
Notes
■ When you switch on the appliance, the highest
microwave output always appears in the display as a
suggestion.
■ If you open the appliance door when the appliance
is in use, the fan may continue to run.
Cooking time elapsed
An audible signal sounds.
Operation has finished.
Stopping the audible signal early:
Touch the 0 button.
Note: After touching the 0 button, the timer function
appears; after a short time, it automatically disappears.
If you touch the 0 button again, the timer function will
disappear instantly.
Press the On/Off button to switch off the appliance.
Changing the cooking time
This can be done at any time.
Use the rotary selector to change the cooking time.
The operation continues.
Changing the microwave output
This can be done at any time.
Use the
¾ arrow to change the microwave output.
Use the rotary selector to set the required microwave
output.
The cooking time remains unchanged.
The operation continues.
Note: If the set cooking time exceeds the maximum
time for the microwave output of 900W, it is reduced
automatically. The operation stops. Press the start/stop
button to start the operation.
Levels Food Maximum cook-
ing time
90W For defrosting delicate foods 1hr 30mins
180 W For defrosting and continued cooking 1hr 30mins
360W For cooking meat and for heating del-
icate foods
1hr 30mins
600 W For heating and cooking food 1hr 30mins
900W For heating liquids 30mins
PLQV
:
PO
PGG
NFOV
O
PLQV
:
O
TUBSUTUPQ
PLQV
:
O
TUBSUTUPQ
Timer en
13
OTimer
Ti mer
You can use the timer as a kitchen timer. The timer runs
alongside other settings. You can set it at any time,
even if the device is switched off. It has its own audible
signal so that you can tell whether it is the timer or a
cooking time which has elapsed.
Setting the timer
The maximum setting is 24hours.
The higher the value, the longer the time intervals.
1. Press the 0 button.
The timer is displayed.
2. Use the rotary selector to set the timer duration.
3. Press the 0 button to start.
Note: The timer will also start automatically after a
few seconds.
The timer duration counts down. The display switches
back after a short time. A timer symbol and the elapsed
time are shown in the status bar.
An audible signal sounds once the timer duration has
come to an end. Use the 0 button to cancel the
audible signal early.
Notes
■ The timer remains visible in the display if the
appliance is switched off.
■ If an operating mode is running, touch the 0 button
to display the timer. The timer duration is displayed
for a few seconds and can be altered.
Changing the timer
Touch the 0 button to change the timer duration. The
timer duration is displayed – use the rotary selector to
change it.
Cancelling the timer
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
PProgrammes
Pr ogr ammes
You can prepare food really easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Setting a programme
Example: "Defrost bread" programme, weight 250g.
1. Press the on/off button.
The appliance is ready to use.
2. Press the menu button.
The operating modes are shown.
3. Use the rotary selector to select "Programmes".
4. Touch the ¿ arrow.
The first programme appears in the display.
5. Use the rotary selector to select "Programmes".
The required programme is selected. The default
value for the weight appears in the display.
6. Touch the ¿ arrow.
The weight can be set.
7. Use the rotary selector to set the required weight.
8. Touch the ¿ arrow.
The preparation instruction is displayed.
9. Press the start/stop button to start.
The appliance starts the operation. The time counts
down on the display.
Notes
■ The cooking time is calculated by the programmes.
■ For some dishes, the display provides instructions
for turning or stirring during preparation. Follow the
information provided. Opening the appliance door
pauses the operation. After closing the appliance
door, restart the operation. If you do not turn or stir
the dish, the programme runs as normal until it
reaches the end.
TUBSUTUPQ
7LPHUPLQV
J
!
PLQV
O
PO
PGG
NFOV
'HIURVWEUHDG
TUBSUTUPQ
J
PLQV
!
'HIURVWEUHDG
Loading ...
Loading ...
Loading ...