Loading ...
Loading ...
Loading ...
@
22
/ SURROUND . . selects previous programme/channel.
selects surround modes.
# - PROG + . . . . . . . . . . selects a previous or following channel.
$ INFO . . . . . . . . . . . . . . turns menu info on and off.
% OK . . . . . . . . . . . . . . . . confirms your selection.
^ BACK . . . . . . . . . . . . . jumps back one level in the menu or turns off
the menu.
& SELECT . . . . . . . . . . . selects TV,VCR, CD, DVD, SAT or AMP mode.
If you use the (fi) 'memory off' key to get to the next teletext page on your
Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.
• If the device does not respond at all, or not to all of the key
commands, follow the instructions under ‘Setting the remote
control’. It is possible that you must enter another code for the
device.
4. Extra possibilities
Adjusting device selection (Mode selector)
The SRU560 is default set for operating TV,VCR, CD, DVD, SAT (settop box,
satellite or cable decoder) and AMP (amplifier).You can select the device you
wish to operate with the SELECT key (mode selector). Each option allows
operation of one device only. If desired, you can program the SELECT key
(mode selector) to select a different kind of device. For example, if you want
to operate a second TV. In the following example you will see how to
configure the DVD key for a second TV.
1 Switch on the second TV.
2 Press the SELECT key to select SAT.
Press the key until SAT lights up in the
selector window.
3 Then keep keys 1 and 6 on the SRU560
pressed simultaneously for three seconds,
until SAT in the selector window lights up.
4 Press keys 9, 9 and 2 in that order.
5 Press the SELECT key to select TV.
Press the key until the light around the
Standby key lights up.
8
Instructions for use
English
SRU560_87_v6.qxd 26-04-2005 15:09 Pagina 8
Loading ...
Loading ...
Loading ...