Loading ...
Loading ...
Loading ...
11
100 IWSUB8
™
Thank you for choosing the 100 Series 100 IWSUB8 subwoofer and for sharing our 'Listen Beyond' philosophy.
To get the most out of this product, we recommend that you read the instructions in this booklet, then store
it in a safe place to refer to in the future.
The 100 IWSUB8 is a high-power bass-reflex passive subwoofer, designed to be flush-fitted into walls with pre-
constructed 16" (40.64cm) OC studs. The installation depth is only 86mm (3
3/8
"). This subwoofer is designed
to be used with the 100 IWSUB8 Amplifier. You can connect up to two subwoofers in parallel.
Attention
Warning: this product requires installation inside the wall structure. We recommend using a professional
installer who will know how to install the product properly and will understand the various mechanical and
vibratory constraints to ensure the product works at its best for years to come. Contact your Focal-JMLab
retailer who will be able to advise you. Focal cannot be held responsible for any consequences due to poor
installation.
Package contents
• 1 x 100 IWSUB8 subwoofer
• 4 x fixing brackets
• 36 x 1
3/16
" (30mm) screws (24 for the brackets, 12 for the frame)
• 1 x grille support frame
• 1 x metal grille with logo
• 12 x shock-absorbing foam strips
• 1 x cut-out template
• 1 x quick start manual
Key points
• Bass-reflex subwoofer with low cut-off at 30Hz.
• Shallow depth (3
3/8
"/ 86mm), for installation in walls with 16” (40.64cm) OC studs.
• 8" (21cm) woofer made with Polyglass technology. Glass microbeads added to the cone surface to help
stiffen the structure.
• Moulded internal vent for noiseless running.
• Nominal impedance of 8 Ohms, to enable installation in pairs with 100 IWSUB8 Amplifier.
• Slim grille with magnetic fastening, ready to paint.
Warranty terms and conditions
In the event of a problem, please contact your Focal dealer.
The warranty for France on any Focal equipment is 2 years, non-transferable in the event of resale, from the
date of purchase. In the event of faulty equipment, you must send it in its original packaging and at your own
expense to the dealer, who will analyse the equipment and determine the nature of the fault. If it is under
warranty, the equipment will be returned to you or replaced ‘carriage paid’. Otherwise, you will be offered an
estimate for repair.
The warranty does not cover damage resulting from inappropriate use or incorrect connection.
Outside France, Focal equipment is covered by a warranty for which the terms and conditions are determined
locally by the official Focal distributor for each country, in accordance with the laws in force in the region in
question.
Our policy of continual product improvement means that Focal-JMlab reserves the right to modify the technical specifications
of its products without notice. Product may vary from images.
Please validate your Focal-JMlab warranty,
it is now possible to register your product online: www.focal.com/warranty
User manual
English
Loading ...
Loading ...
Loading ...