Loading ...
Loading ...
Loading ...
7
Installing Your Door Handle and Shelves
INSTALLING THE DOOR HANDLE:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door until the screw passes through the
door.
3. Align the handle with the screws and tighten using a Phillips head screwdriver until the handle is flush
against the door frame.
Caution: Do not over-tighten the screws as this may cause damage to the handle or to the stainless steel
door.
4. Carefully press the door gasket into its original position.
INSTALLING THE SHELVES:
1. Open the door completely.
2. Line up the shelf notches with the rail posts on both the right and left sides.
3. Push the shelf down and then push it all the way inwards until the shelf fully rests inside of the unit and
you are able to close the door.
4. The shelf should glide smoothly back and forth. If it does not, you may need to remove it and start over.
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their tracks.
Loading ...
Loading ...
Loading ...