Loading ...
Loading ...
Loading ...
4
Tools needed for
installation:
Level
Pliers
Utility
knife
Wrench
Scissors
Flat-blade
screwdriver
Electrical requirements
Grounding
prong
PAGE 3
3-prong grounding-
type outlet
3-prong
grounding
plug
Power
supply cord
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
Electrical Shock Hazard
Parts supplied for
installation:
s
Remove parts from packages. Check
that all parts were included.
1 hose clamp
2 inlet hoses
4 at water hose washers
2 front-leveling legs with nuts
1 drain hose
Grounding instructions
This appliance must be grounded. In the
event of a malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least
resistance for the electric current. This
appliance is equipped with a cord having
an equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances.
WARNING – Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check with
a qualied electrician or serviceman if you
are in doubt as to whether the appliance is
properly grounded. Do not modify the plug
provided with the appliance – if it will not t
the outlet, have a proper outlet installed by
a qualied electrician.
WARNING
0"
0"
Front view
(door not shown)
Side view
Minimum installation spacing
Recessed area
instructions
This washer may be installed in a
recessed area or closet.
The installation dimensions shown are
the minimum spaces allowable.
Additional spacing should be
considered for ease of installation
and servicing. If closet door is
installed, the minimum air openings in
top and bottom of door are required.
Louvered doors with air openings in
top and bottom are acceptable.
Companion appliance spacing
should be considered.
Closet door
Front view
Closet door
17"
(430 mm)
14"
(350 mm)
max.
4"
(100 mm)
min.
1" (25 mm)
min.
3"
(76 mm)
3"
(76 mm)
24 sq. in.
(1.55 sq. m)
24 sq. in.
(1.55 sq. m)
48 sq. in.
(3.10 sq. m)
48 sq. in.
(3.10 sq. m)
If codes permit and a separate ground wire
is used, it is recommended that a qualied
electrician determine that the ground path
is adequate.
Do Not ground to a gas pipe.
Check with a qualied electrician if you are
not sure the washer is properly grounded.
Do Not have a fuse in the neutral or ground
circuit.
A 120-volt, 60-Hz, AC-only, 15- or
20-ampere fused electrical supply is
required. (Time-delay fuse or circuit breaker
is recommended.) It is recommended that
a separate circuit serving only this
appliance be provided.
Loading ...
Loading ...
Loading ...