Loading ...
Loading ...
Loading ...
(198,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
FP197.)
5) Select lever/gear position indicator (Re-
fer to “Select lever/gear position indica-
tor” FP193.)
6) X-MODE indicator (Refer to “X-MODE
indicator” FP194.)
7) Odometer (Refer to “Odometer”
FP171.)/Double trip meter (Refer to
“Double trip meter” FP171.)
A: Deactivating the EyeSight system
B: Activating the EyeSight system
& Basic operation
S03BN01
Control switch
1)
(Up)
2)
/SET (Enter)
3)
(Down)
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “
/SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the “
” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “
” on the display,
pull the “
/SET” switch on the steering
wheel toward you.
& Welcome screen (opening
animation) and Good-bye
screen (ending animation)
S03BN08
When the driver’s door is opened and
closed after unlocking the door, the wel-
come screen (opening animation) will
appear on the combination meter display
for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display gradually turns off by show-
ing Good-bye screen (ending animation).
NOTE
. The welcome screen and the good-
bye screen may differ in the actual
words and appearance.
. The basic screen will be shown
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
. Once the welcome screen appears, it
takes a certain period of time to display
it again.
. If the ignition switch is operated
after unlocking the driver’s door, the
welcome screen will not appear even
when the driver’s door is opened and
closed.
. The welcome screen will disappear
when you lock the driver’s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
. The welcome screen including the
multi-function display (color LCD) and
the audio/navigation unit can be set to
on or off.
. The welcome screen and the good-
bye screen can be set to on or off. For
details, refer to “Menu screens”
FP200.
Combination meter display (color LCD)
196
Loading ...
Loading ...
Loading ...