Loading ...
Loading ...
Loading ...
6
UNIT SETUP
1. Assemble the Floor Stand by attaching
the Legs to the Base and then inserting
the Telescoping Pole.
2. Use Two (2) M6*14 Screws to combine
Bracket 1 and Bracket 2.
3. Use Two (2) M5*12 Screws to install the
Mounting Bracket to the rear of the
Heater Body.
4. Use Two (2) M6*38 Screws to install front
of the Mounting Bracket to the rear of
the Stand.
5. Use Two (2) M5*12 Screws to fix the Grill
Guard to the rear of the Heater Body.
6. Loosen the Telescoping Lock and slide
the pole and unit up or down to your
desired height, then re-tighten the
Telescoping Lock.
INSPECT THE UNIT FOR DAMAGE BEFORE SETUP OR USE.
Floor Stand Setup
This step is optional but recommended.
x2
x2
Loading ...
Loading ...
Loading ...