Loading ...
Loading ...
Loading ...
14
TUNED
STEREO
MHz
§
≠ +
–
+
0
g
)
≠ +
–
+
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏
π
DOLBY NR
π
ª
–/+
3 Press § and insert a recordable tape
into deck B.
4 Press REC PAUSE/START.
Deck B stands by for recording.
5 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press π on deck B.
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use – and + to tune
in the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” lights up after pressing REC
PAUSE/START in step 6.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
Dolby NR is off and DIRECTION (A or RELAY) is
ß when the mains AC power supply is switched
off.
Recording from the
radio
With the side
you want to
record facing
forward
You can record the radio programme on a
tape by calling up a preset station. You can
use TYPE I (normal) or TYPE II (CrO
2
) tapes.
The recording level is automatically adjusted.
Turn counter-
clockwise for
lower preset
numbers.
1 Press TUNER BAND to select the
band you want.
2 Turn the jog dial to tune in a preset
station.
Turn clockwise
for higher
preset numbers.
Preset number
Frequency
1/u
(Power)
1
5
4,6
2
3
Loading ...
Loading ...
Loading ...