ElectriQ ECFIRPH7W - 700w Infrared Wall Mounted Frameless Panel Heater

User Manual - Page 4

For ECFIRPH7W.

PDF File Manual, 21 pages, Read Online | Download pdf file

ECFIRPH7W photo
Loading ...
Loading ...
Loading ...
4
restrict airflow, as this may present a fire risk.
The heater must not be located immediately below a socket outlet.
Always ensure the unit is secure before operation. Do not use on unstable or
uneven surfaces and if wall-mounted, it must be securely attached to a suitable
wall.
Do not move or tilt the unit.
Avoid keeping the unit in direct sunlight for a long period of time.
The heater is designed to be used at temperatures above -20°C. If it is exposed
to temperatures below this, it must be allowed to warm above this level before
operation.
Do not attempt to repair, disassemble or modify the appliance. This unit contains
no user-serviceable parts.
Always unplug or disconnect the appliance from the mains power supply when
not in use, or when moving or cleaning it. Do not pull the cord to unplug the
heater.
Keep the heater clean. Do not allow any object to enter the ventilation or exhaust
opening as this may cause electric shock, fire, or damage to the heater.
Do not use the appliance for anything other than its intended use. It is designed
for domestic indoor use only.
There may be a trace of odour during the first few minutes of initial use, or after
a period of storage. This is normal and will quickly disappear.
This appliance has hot and arcing or sparking parts inside. Do not use it in areas
where gasoline, paint, or any flammable liquids are used or stored.
This appliance is not intended for use in bathrooms, laundry areas and similar
humid locations. Never locate this appliance where it may fall into a bathtub or
otherwise become exposed to water.
If the unit is wall-mounted, it must be installed in accordance with current
regulations for the area of installation. If unsure, professional advice should be
sought.
WARNING: To reduce the risk of fire or electrical shock, DO NOT use this
appliance with any solid-state Speed Control Device or any variable speed
controllers.
ENERGY SAVING AND UNIT SAFETY PROTECTION TIP
Do not cover or restrict the airflow. Do not use in a dusty environment.
For safety and maximum performance, when used as a portable unit the minimum
distance from a wall or objects should be 50cm.
Loading ...
Loading ...
Loading ...